How do I reboot my (WAP) Wireless Access Point?
Understanding rebooting your wireless access point is a troubleshooting step toward remedying your WiFi issue, to reboot the Aerohive WAP,
1- Unplug the ethernet cable from the WAP,
2- Notice the indicator light turn off.
3- After a few seconds, reconnect the ethernet cable
4- Wait a few minutes for the indicator light to turn white.
PLEASE NOTE - Do not press the reset button on any Aerohive WAP in-store unless directed by BION or TECHit. The reset button is depicted below.

WAP parts indicated
Related Articles
How to troubleshoot store cameras?
Your cameras are down? Sorry! Let's start here.. 1- Cameras Powered? Confirm the Dell switch is getting power by confirming LED lights near the occupied ports are lit. Ensure that the several ethernet cables that are connected to the Dell switch are ...
Yealink Phone | Access Voicemail Setup
Make sure to use the main extension phone for voicemail setup. · Each store has two extensions o Them main extension will be the store # following “01” o Example: Store #055 will be 5501 Once you have the main extension number, press the ...
Importance of Reporting Internet Outages at Retail Stores
Please follow the step below if your WiFi is down: Email techoutage@untuckit.com ASAP with what you are experiencing - why you've concluded internet is down e.g. "I can't visit NewStore Omnichannel or any website on my laptop or iPad while connected ...
How to Reset TSP Receipt Printer Configuration?
Network settings that were changed such as IP address, subnet mask, disabled dynamic IP address (DHCP) can be returned to the settings when it was purchased. When you have changed the wireless LAN settings of the main unit, and it can no longer ...
Troubleshooting Store Yealink Phone
If you are having issues with your store Yealink phone please follow the steps below: Locate the Yealink Phone Base Station. The phone base station usually lives in the store's back of house near the other network infrastructure appliances. See ...